ວິທີ Jailbreak iPhone OS 3.0 ໂດຍໃຊ້ RedSn0w (Windows)

Posted by xEKx on June 21, 2009 Leave a comment (4) Go to comments

ນີ້ແມ່ນວິທີ jailbreak iPhone (ທັງລຸ່ນ classic ແລະ 3G)

This tutorial can be used to jailbreak before applying the UltraSn0w unlock. UltraSn0w is not released yet. It will be soon. Meaning, if you require the unlock immediately then you should wait to jailbreak until UltraSn0w is released.

- ຖ້າໃຜໃຊ້ iPhone 3G ແມ່ນສາມາດ update ມາເປັນ firmware 3.0 ແລະສາມາດເຂົ້າເມນູໄດ້ ແຕ່ຍັງໂທບໍ່ໄດ້
- iPhone 3G ໃຫ້ຖ້າໄປຈົນກວ່າ Ultrasn0w ຊິຖືກປ່ອຍ ຄັນຢາກລອງລະແມ່ນມີແຕ່ເຂົ້າເມນູໄດ້ເທົ່ານັ້ນ
Step One
Create a folder on your desktop called Pwnage
- ສ້າງ folder ແລ້ວໃສ່ຊື່ວ່າ Pwnage ໄວ້ໃນໜ້າ desktop
- Download RedSn0wfrom here ແລ້ວເອົາໄປໃສ່ໃນ Pwnage folder
- Download firmware 3.0 ໄປໄວ້ໃນ Pwnage folder

Download RedSn0wfrom here or here and place it in the Pwnage folder. Likewise, download the latest 3.0 firmware from below and place it in the same folder.
Download firmware ທີ່ນີ້
3.0.0 (2G): iPhone1,1_3.0_7A341_Restore.ipsw
3.0.0 (3G): iPhone1,2_3.0_7A341_Restore.ipsw

Extract the RedSn0w zip file to the Pwnage folder.
ແຕກໄຟລ໌ RedSn0w zip file ໄວ້ໃນ Pwnage folder.

ອ່ານຕໍ່ຂ້າງໃນ

Step Two
Connect your iPhone to the computer and launch iTunes.
connect iPhone ໃສ່ computer ແລະ ເປີດໂປຣແກຣມ iTunes

Select your iPhone from the list of devices on the left. Now hold down shift and click the Restore button. Restore is preferred as it won’t create any wasted space on your iPhone.

ເລືອກ iPhone ຂອງທ່ານຈາກ list devices ທາງຂ້າງຊ້າຍ. ຈາກນັ້ນ ກົດປຸ່ມ shift ແລະ click the Restore button

Navigate to the Pwnage folder on your desktop and select the firmware ipsw. Click the Open button to continue.

ຈາກນັ້ນໃຫ້ເລືອກ firmware ທີ່ຫາກໍ່ download ມາໃນ Pwnage folder ແລະ  ເລືອກເອົາ firmware ipsw 3.0 ທີ່ໂຫລດມາ. ຈາກນັ້ນ click Open button to continue.

Step Three
Once iTunes has finished updating your iPhone to the desired firmware you may launch redsnw0w.exe from the Pwnage folder on your desktop.
ເມື່ອ iTunes update iPhone ແລ້ວໆ ໃຫ້ເປີດໂປຣແກຣມ redsnw0w.exe ຈາກ Pwnage folder ທີ່ຢູ່ໜ້າ desktop

Step Four
Once RedSn0w opens click the Browse button
ເມື່ອ RedSn0w ເປີດ ໃຫ້ click Browse button

Step Five
Select the firmware ipsw we placed in the Pwnage folder on our desktop then click Open
ເລືອກ firmware ipsw ທີ່ເຮົາເອົາໄປວາງໄວ້ທີ່ Pwnage folder ຢູ່ໜ້າ desktop ຈາກນັ້ນ click open

Step Six
Once the firmware has been verified click the Next button to continue.
ເມື່ອມັນກວດສອບ firmware ແລ້ວ ໃຫ້ click Next

Step Seven
Make sure Cydia is selected and click the Next button.
ໃຫ້ໝັ້ນໃຈວ່າ Cydia ຖືກເລືອກເປັນເຄື່ອງໝາຍຖືກ ແລະ click the Next

Step Eight
Please plug your iPhone into the computer and make sure its OFF then click the Next button
ສຽບ iPhone ເຂົ້າ computer ແລະ ໃຫ້ iPhone ຢູ່ໃນຖານະມອດໄວ້

Step Nine
RedSn0w will now guide you through the steps to get into DFU mode.
RedSn0w ຈະແນະນຳຂັ້ນຕອນການເຂົ້າ DFU mode

Hold down both the Home button and the Power button for 10 seconds.
step 1 ກົດປຸ່ມ power 3 ວິນາທີ
step 2 ກົດປຸ່ມ Home ແລະ Power ທັງສອງພ້ອມກັນ ສຳລັບ 10 ວິນາທີ

Release the Power button and continue holding the Home button until RedSn0w detects the device.
step 3 ປ່ອຍປຸ່ມ Power ແລະ ຍັງຄົງກົດປຸ່ມ Home ຕໍ່ໄປ ຈົນກວ່າ RedSn0w ຄົ້ນຫາ iPhone ໄດ້

Step Ten
Your iPhone will now reboot
iPhone ຂອງທ່ານຈະ reboot

Step Eleven
RedSn0w will then begin uploading the new RAM Disk.
RedSn0w ຈະເລີ່ມ upload RAM Disk ໃໝ່

Step Twelve
Once this is complete you will be notified that RedSn0w is done. Click the Finish button.
When your iPhone finishes reboot (5 minutes or so). It will be jailbroken with Cydia on the SpringBoard.
ເມື່ອຂັ້ນຕອນສຳເລັດ ຈະຂຶ້ນເຕື່ອນວ່າ RedSn0w ສຳເລັດແລ້ວ

ແລ້ວ iPhone ກໍ່ສາມາດແຫກຄຸກໄດ້

credit – iClarified

ເທັກນິກ, ໄອໂຟນ, , , , , ,
Leave a comment

4 Comments.

  1. Kataiy ( KT ) June 21, 2009 at 5:22 am

    wooooooo
    dhai leaw dah p nongggggg
    ao iphone koi pen nu thod long program ni leiiiii
    kun iphone phai lock ka h tarm kharng theung t i kum ek lao kien wai hai hun dahhh ^^ la mun si dhai!!!

    PS. mi tair kao iphone dhai seu2 dahhh
    saun ja tel ock hun man tong tha program ock ma eikkkkk

    thank dah ek ^^

    kataiy

  2. xEKx June 21, 2009 at 5:25 am

    5555555555+

    ຕັ້ງຈຳເປັນຂຽນຫວາ

    ຈັກໜ້ອຍມາໃໝ່ ຖ້າ Ultrasn0w ເດີ້

  3. KATAIY July 4, 2009 at 9:00 am

    ^
    ^
    ^
    ^

    theuk phai bou lair bung kub – -”

  4. khavy July 26, 2010 at 3:19 am

    ມີ Database Dictionary ລາວ ບໍ່????? ຢາກໄດ້ຫລາຍໆ
    ຊິເອົາໄປໃສ່ ໃນ ໂປຣແກມVB.net & Window Mobile….
    ສ້າງໂປຣແກມຢູ່VB.netແລ້ວແຕ່ບໍ່ມີ Database ເລີຍ
    ຖ້າໄດ້ຈະບໍ່ລືມບຸນຄຸນ Thx so muchhhhhh
    khavy7@hotmail.com :cry: :cry: :cry:

Leave a Reply


[ Ctrl + Enter ]

captcha service